---
title: "Zyxel GS1900 Zero-Day CVE-2026-107441 Beats June Patch"
url: https://erroneo.us/security/briefs/zyxel-gs1900-zero-day-cve-2026-107441-patch-bypass/
description: "Exploited pre-auth RCE in Zyxel GS1900 switch web UI works on firmware patched for CVE-2026-7273. Upgrade to 2.90(xxxx.3)C0; urgent if management is reachable."
type: security-brief
section: "Security Digest"
date_published: 2026-11-03
date_modified: 2026-11-07
publisher: erroneo.us
author: erroneo.us Security Desk
verdict: "Patch this week"
cves: ["CVE-2026-107441", "CVE-2026-7273"]
severity: "high"
exploited: "in-the-wild"
kev: true
license: All rights reserved. Quote with attribution and a link.
---

# Zyxel GS1900 Zero-Day CVE-2026-107441 Beats June Patch

**Verdict: Patch this week.** Every GS1900 still on a .2 or older build is open to the exploit used against roughly 1,000 switches, even if you patched in June. Upgrade to the .3 firmware this week, and today if switch management is reachable from the internet, a guest network or a flat LAN.

- **Who must act:** Owners of GS1900-8, -8HP, -10HP, -16, -24, -24E, -24EP, -24HPv2, -48 or -48HPv2 switches on 2.90(xxxx.2)C0 or earlier, including those that applied the June 2026 CVE-2026-7273 fix.
- **Who can relax:** Sites with no GS1900 switches, and sites on the .3 firmware whose switch web interface is reachable only from a locked-down management network.
- **Affected:** GS1900-8 2.90(AAHH.2)C0 and earlier; GS1900-8HP 2.90(AAHI.2)C0 and earlier; GS1900-10HP 2.90(AAZI.2)C0 and earlier; GS1900-16 2.90(AAHJ.2)C0 and earlier; GS1900-24 2.90(AAHL.2)C0 and earlier; GS1900-24E 2.90(AAHK.2)C0 and earlier; GS1900-24EP 2.90(ABTO.2)C0 and earlier; GS1900-24HPv2 2.90(ABTP.2)C0 and earlier; GS1900-48 2.90(AAHN.2)C0 and earlier; GS1900-48HPv2 2.90(ABTQ.2)C0 and earlier
- **Fixed:** GS1900-8 2.90(AAHH.3)C0; GS1900-8HP 2.90(AAHI.3)C0; GS1900-10HP 2.90(AAZI.3)C0; GS1900-16 2.90(AAHJ.3)C0; GS1900-24 2.90(AAHL.3)C0; GS1900-24E 2.90(AAHK.3)C0; GS1900-24EP 2.90(ABTO.3)C0; GS1900-24HPv2 2.90(ABTP.3)C0; GS1900-48 2.90(AAHN.3)C0; GS1900-48HPv2 2.90(ABTQ.3)C0
- **CVEs:** CVE-2026-107441, CVE-2026-7273
- **CISA KEV:** yes · **Exploitation:** Exploited in the wild

## What to do

1. Inventory GS1900 switches and confirm each one's firmware build; anything ending .2 C0 or lower is vulnerable.
2. Upgrade every unit to its 2.90(xxxx.3)C0 build (the 'V2.90 Patch 3' release).
3. Remove any internet or guest-network path to switch management and keep the web interface on a management VLAN behind ACLs; verify with an external nmap scan.
4. Change switch admin passwords, starting with any factory defaults, and rotate SNMP, RADIUS/TACACS+ and other secrets stored in configs.
5. Treat any switch whose web interface was reachable from untrusted networks before the upgrade as possibly compromised and check it before trusting it.

### How to check if you are affected

- Look for outbound connections from switch management addresses, especially TFTP (UDP 69) or other file transfers a switch should never initiate.
- Look for bursts of large POST requests to the switch's web interface or unexplained web-service crashes and reboots.
- Compare running configurations against a known-good backup for new accounts, changed passwords or altered management ACLs.
- If you suspect compromise, factory-reset the switch, flash the .3 firmware and restore a clean configuration rather than patching in place.

## What happened

On November 3, 2026, Zyxel published an [advisory](https://www.zyxel.com/global/en/support/security-advisories/zyxel-security-advisory-for-out-of-bounds-write-vulnerability-in-gs1900-series-switches-11-03-2026) for CVE-2026-107441, an out-of-bounds write (CWE-787) in the CGI program of its GS1900 smart managed switches. According to the [CVE record](https://www.cve.org/CVERecord?id=CVE-2026-107441), it "could allow an unauthenticated adjacent attacker to exploit the flaw and potentially execute OS commands via a crafted HTTP request". Zyxel scores it CVSS 3.1 8.8 (AV:A/AC:L/PR:N/UI:N). Zyxel credits Yegor Vasilenko and Fernando Mercês of [Binarly](https://www.binarly.io/blog/zyxel-gs1900-rce-cve-2026-107441). The fixed firmware, "V2.90 Patch 3", was posted on Zyxel's [community forum](https://community.zyxel.com/en/discussion/34420/switch-gs1900-series-v2-90-patch-3-firmware-release) on October 23. Its release notes say only "Fixed Pre-authentication out-of-bounds write vulnerability."

The bigger news is the context. In September, roughly 1,000 GS1900 switches were reported compromised and the attacks were attributed to CVE-2026-7273. Zyxel had [patched that bug in June](https://www.zyxel.com/global/en/support/security-advisories/zyxel-security-advisory-for-stack-based-buffer-overflow-vulnerability-in-gs1900-series-switches-06-16-2026), and CISA listed it in KEV. Binarly now says the attackers were actually exploiting this new flaw, so the June patch never stopped them. [SecurityOnline](https://securityonline.info/zyxel-gs1900-zero-day-cve-2026-107441/) summarizes Binarly's account. The researchers found an obfuscated Python script labeled "Zyxel GS1900 Pre-Auth RCE" in an open directory on a command server for the JITTERLY Linux backdoor. They tested it on real hardware, and it worked "without changes" against firmware that already carried the CVE-2026-7273 fix. [SecurityWeek](https://www.securityweek.com/zyxel-switch-hacks-blamed-on-patched-flaw-actually-exploited-a-zero-day/) reports Binarly's conclusion that the flaw was exploited as a zero-day against almost 1,000 devices, and that "the patch for CVE-2026-7273 remained ineffective."

Binarly places the root cause in `dispatcher.cgi`. The program copies each POST parameter into a fixed global buffer without checking the parameter's size or the number of parameters. The June fix added checks "too late, after the parameter counter was already corrupted." The new firmware caps each copied field at 511 bytes and checks the count before copying.

## Who is affected

The same ten models as in June, on firmware up to and including the .2 builds that carried the June fix: GS1900-8, -8HP, -10HP, -16, -24, -24E, -24EP, -24HPv2, -48 and -48HPv2. The fixed builds end in .3 C0, for example 2.90(AAHL.3)C0 for the GS1900-24 and 2.90(ABTQ.3)C0 for the GS1900-48HPv2. The full table is in Zyxel's advisory and on [NVD](https://nvd.nist.gov/vuln/detail/CVE-2026-107441). Zyxel says on-market products not in the table are unaffected. The status of end-of-life GS1900 v1 hardware is not disclosed as of November 7, 2026.

## Do you really need to act?

If you own these switches, yes. Anyone who patched in June and moved on is still exposed to the exact exploit used in the wild. The adjacent-network rating still matters, though: the attacker needs HTTP or HTTPS access to the switch's web interface. If only a restricted management VLAN can reach it, the real risk is an attacker already inside that segment, and upgrading within the week is proportionate. If the web interface is reachable from the internet, a guest or tenant network, or a flat office LAN, treat it as urgent and assume the switch may already have been compromised. That is how the original campaign appears to have reached devices in dozens of countries.

As of November 7, 2026, CVE-2026-107441 is not in CISA's KEV catalog. CISA's SSVC entry in the CVE record, dated November 3, still lists exploitation as "none". The exploitation evidence comes from Binarly's analysis of the attacker's tooling, not from a vendor or government confirmation. No minimized public proof of concept had been released at the time of writing, though Binarly says it plans one.

## What to do now

1. List every GS1900 and its firmware string from the web interface or your management system. Any build ending in .2 C0 or lower is vulnerable.
2. Download the V2.90 Patch 3 firmware for each model and upgrade, for example from 2.90(AAHL.2)C0 to 2.90(AAHL.3)C0 on a GS1900-24.
3. Check reachability from outside, for example `nmap -Pn -p 80,443 --open <your-public-ranges>`, and from guest and user VLANs. Allow switch management only from an admin network.
4. Change admin passwords, starting with any factory defaults. Rotate SNMP communities and RADIUS/TACACS+ keys, since the earlier campaign stole configurations and password hashes.
5. For switches that were exposed before the upgrade, follow the checks below before you trust them again.

## How to tell if you were hit

No hashes, IP addresses or domains for this exploit have been published as of November 7, 2026. Indicators published for the earlier CVE-2026-7273 campaign still apply, because Binarly says it was the same activity. Watch for outbound connections that a switch should never make, especially TFTP (UDP 69) from switch management addresses. Look for bursts of large POST requests to the web interface, crashes or reboots of the web service, and unknown hosts downloading files from the switch. Compare the running configuration with a known-good backup. If anything looks wrong, factory-reset the unit, flash the .3 firmware, restore a clean configuration and rotate every secret it held. Binarly ties the tooling to the JITTERLY backdoor and the SIXZUT rootkit, so in-place patching alone may not remove an implant.

## Timeline

- Jun 16, 2026 — Zyxel fixes CVE-2026-7273 in the .2 firmware builds.
- Sep 21, 2026 — CISA adds CVE-2026-7273 to KEV after reports of about 1,000 compromised switches.
- Sep 29, 2026 — Binarly reports the new flaw to Zyxel, according to SecurityWeek.
- Oct 23, 2026 — Zyxel posts the V2.90 Patch 3 (.3) firmware.
- Nov 3, 2026 — Zyxel advisory and CVE-2026-107441 are published, and Binarly publishes its findings.
- Nov 7, 2026 — The CVE is not in KEV, and no public proof of concept has been released.

## Sources

1. [Zyxel — Security advisory for out-of-bounds write vulnerability in GS1900 series switches](https://www.zyxel.com/global/en/support/security-advisories/zyxel-security-advisory-for-out-of-bounds-write-vulnerability-in-gs1900-series-switches-11-03-2026)
2. [Zyxel Community — Switch GS1900 series V2.90 Patch 3 firmware release](https://community.zyxel.com/en/discussion/34420/switch-gs1900-series-v2-90-patch-3-firmware-release)
3. [CVE record — CVE-2026-107441](https://www.cve.org/CVERecord?id=CVE-2026-107441)
4. [NVD — CVE-2026-107441](https://nvd.nist.gov/vuln/detail/CVE-2026-107441)
5. [Binarly — New Zyxel GS1900 pre-auth RCE vulnerability revealed](https://www.binarly.io/blog/zyxel-gs1900-rce-cve-2026-107441)
6. [Zyxel — Security advisory for stack-based buffer overflow vulnerability in GS1900 series switches (CVE-2026-7273)](https://www.zyxel.com/global/en/support/security-advisories/zyxel-security-advisory-for-stack-based-buffer-overflow-vulnerability-in-gs1900-series-switches-06-16-2026)
7. [SecurityOnline — Zyxel GS1900 zero-day CVE-2026-107441](https://securityonline.info/zyxel-gs1900-zero-day-cve-2026-107441/)
8. [SecurityWeek — Zyxel Switch Hacks Blamed on Patched Flaw Actually Exploited a Zero-Day](https://www.securityweek.com/zyxel-switch-hacks-blamed-on-patched-flaw-actually-exploited-a-zero-day/)

---
Source page: https://erroneo.us/security/briefs/zyxel-gs1900-zero-day-cve-2026-107441-patch-bypass/ · Security Digest: https://erroneo.us/security/ · More: https://erroneo.us/llms.txt
